We Create Stunning Hardscape Patios

When planning the ground preparation, crucial components to consider are slope, paver thickness, and foundation. If paver patio was excavated 6 inches, 1 inch is reserved for the fine sand, gravel, and 2 inches for the paver depth. Another option is using concrete pavers that need no foundation. For cobblestone pavers, it is necessary to first break up the concrete with a shovel before placing them.

Next step while constructing a brick or paver stone patio is planning a proper drainage over the whole area. A Slope away from the house will guarantee that all water drains away from the foundation. Furthermore, there should be no dips or lumps in the surface to prevent water from pooling. Solvent-based sealers are recommended on top of the pavers for better results.

If you are residing in Florida and Orlando the base material will be clay, rock, or most probably dirt which is not suitable base and will shift or swell easily in the longer run. Crushed gravel is generally recommended as bedding layer but our experience with road base is great. Road base compacts better than a general gravel base. This will prevent any settling in the pavers and keep the paver patio free from pooling water.

While several factors influence the cost of a patio paver project, including the type of pavers used, the size of the patio, and labor. A 20x20 brick paver patio would typically cost somewhere from $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor can run $6 to $11 per square foot.